Telecom Services Information Services home

Setup Instructions for AWH55+ Headset for 1608 Phones

  1. Plug the short cord from headset dock into the 9600 Hookswitch Control Cord.

    Then plug the 9600 control cord into the headset port on the bottom of the 1608 phone.
  2. Remove protective cover from ring detector jack and plug in ring detector.

  3. Remove cover from ring detector microphone and place over speaker on phone under the handset.

  4. Plug power into the headset dock to complete the setup.

To answer a call or get dial tone press the headset button once.

To disconnect press the headset button a second time.

To adjust the volume push the volume switch on the headset up to increase the volume and down to decrease it.

To mute the headset push the volume switch in, there will be 3 rapid beeps indicating the headset is muted.